Control units for labelling machines

The solution that offers the best price/performance ratio for the control of labelling machines with stepper motors.

WRPICO LABEL interfaces with the operators via a 4-figure, 7-segment display and 4 LED indicators. Settings are made through a scrolling menu which allows working formats to be stored.

In the basic version, the software installed allows the following functions to be set and managed:

• Work by setting the product speed via the keypad, or by label detection via a detection encoder mechanically connected to the conveyor
• Start delay, expressed in millimetres, to set the position of the label on the product.
• Pre-distribution to position the edge of the label on the peeler bar.
• Set-up of the start and stop ramps for starting and stopping the step motor.
• Counter display of the labelled products, with stop at the end of the set production run.
• Automatic recovery of missing label with setup of the labels queue between the stop photocell and the peeler bar.
• Management of end-of-roll and near-end-of-roll warning.
• Application of several labels on the same product with adjustment of the position of each label on the product.
• Management of printing time.